Specifications

ManualsBrandsCrestron ManualsComputer equipmentSurround Sound Tuning Kit

Crestron Adagio

AMS Media System

• Turn the selection knob to select the source to be named and press the soft

button labeled Edit (or press the ENTER button). To cancel and return to

the Installer Tools menu, press MENU.

NOTE: If a source is designated as the AAE theater source, it cannot be

renamed.

• To use one of the factory-installed names, turn the selection knob clockwise

or counterclockwise to display the desired source name and press ENTER.

• To enter a custom name, turn the selection knob until [Custom Name] is

displayed and press ENTER.

Edit Source Name

Enter Name for Src. 1

1: S1 AM/FM

2: S1 XM

3: Source 3

Del < >

SOURCE

ROOM

HOUSE

SURRND

THEATER

DISPLAY

Done

⇒ Select letters (upper and lower-case), numbers, or other characters by

turning the selection knob until the desired letter, number, or other

character is displayed on the LCD. Move the cursor to another position

by pressing the soft buttons labeled g and h. To delete a character,

press the soft button marked Del.

NOTE: The maximum length for any source name is 16 characters.

⇒ After entering the new source name, press Done to save the name and

return to the list of sources.

• Rename other sources if desired. If all of the sources have been

named/renamed, press MENU to return to the Distributed Audio menu.

Hide Sources

This screen allows you to hide sources from the list of available sources. This screen

also allows you to reveal sources that were previously hidden.

• Open Installer Tools as described on page 41, select Configure Distributed

Audio, and press the ENTER button.

• Turn the selection knob to select Hide Sources, and press the ENTER

button.