Specifications

ManualsBrandsCrestron ManualsComputer equipmentSurround Sound Tuning Kit

Media System Crestron Adagio

AMS

by pressing the soft buttons labeled g and h. To delete a character,

press the soft button marked Del.

NOTE: The maximum length for any room name is 16 characters.

⇒ After entering the new room name, press Done to save the name and

return to the list of room names.

• Rename other rooms if desired. If all of the rooms have been

named/renamed, press MENU to return to the Distributed Audio menu.

Set AAE Theater Source

So rooms connected to the AAE can receive the theater downmix, an analog audio

input on the AAE must be designated to receive the theater downmix from the AMS.

• Open Installer Tools as described on page 41, select Configure Distributed

Audio, and press the ENTER button.

• Turn the selection knob to select Set AAE Theater Source, and press the

ENTER button.

Set AAE Theater Source

Select the input to use for

the theater downmix input on the

AAE: 6

SOURCE

ROOM

HOUSE

SURRND

THEATER

DISPLAY

• Turn the selection knob to display the AAE input to use and press the

ENTER button.

NOTE: The default setting is input number 6 since the input is not used by the tuner

cards, CEN-IDOC, or AAS.

Name Sources

This screen allows you to customize the name of each of the analog sources that are

displayed on the LCD.

• Open Installer Tools as described on page 41, select Configure Distributed

Audio, and press the ENTER button.

• Turn the selection knob to select Name Sources, and press the ENTER

button.

Select Source to Name

1: S1 AM/FM

2: S1 XM

3: Source 3