Specifications

ManualsBrandsCrestron ManualsComputer equipmentSurround Sound Tuning Kit

Crestron Adagio

AMS Media System

⇒ Select letters (upper and lower-case), numbers, or other characters by

turning the selection knob until the desired letter, number, or other

character is displayed on the LCD. Move the cursor to another position

by pressing the soft buttons labeled g and h. To delete a character,

press the soft button marked Del.

NOTE: The maximum length for any room name is 16 characters.

⇒ After entering the new room name, press Done to save the name and

return to the list of room names.

• Rename other rooms if desired. If all of the rooms have been

named/renamed, press MENU to return to the Distributed Audio menu.

Name AAE Rooms

This screen allows you to customize the displayed name of rooms connected to an

AMS through an AAE.

• Open Installer Tools as described on page 41, select Configure Distributed

Audio, and press the ENTER button.

• Turn the selection knob to select Name AAE Rooms, and press the

ENTER button.

Select AAE Room to Name

Name AAE Rooms

1: AAE Rm 1

2: AAE Rm 2

3: AAE Rm 3

SOURCE

ROOM

HOUSE

SURRND

THEATER

DISPLAY

Edit

Turn the selection knob to select the room to be named and press the soft

button labeled Edit (or press the ENTER button). To cancel and return to

the Installer Tools menu, press MENU.

• To use one of the factory-installed names, turn the selection knob clockwise

or counterclockwise to display the desired room name and press ENTER.

• To enter a custom name, turn the selection knob until [Custom Name] is

displayed and press ENTER.

Edit Room Name

Enter AAE Rm 1 Nam