Specifications

Media System Crestron Adagio
®
AMS
Enter Name of Virtual Theater Input
Enter Input 1 Name
Audio: Multi-Channel
Video: [Component 1]
Name: Movies
SOURCE
ROOM
HOUSE
MENU
SURRND
THEATER
DISPLAY
MORE
Del < > Done
 Select letters (upper and lower-case), numbers, or other
characters by turning the selection knob until the desired
letter, number, or other character is displayed on the LCD.
Move the cursor to another position by pressing the soft
buttons labeled g and h. To delete a character, press the soft
button marked Del.
NOTE: The maximum length for any virtual theater input
name is 16 characters.
 After entering the new name, press Done to save the name and
return to the list of sources.
• Once all of the parameters have been set, press the MENU button to return
to the list of virtual theater inputs.
• Repeat the previous steps for each virtual theater input.
Restore Defaults
The theater configuration can be restored to its default factory settings from the front
panel.
• Open Installer Tools as described on page 41, select Configure Theater,
and press the ENTER button.
• Turn the selection knob to select Restore Defaults and press the ENTER
button to open the Restore Defaults control.
Restore Defaults Warning
Restore Defaults
All Theater
source and audio settings
will be reset. Continue?
SOURCE
ROOM
HOUSE
MENU
SURRND
THEATER
DISPLAY
MORE
Yes No
• Press the soft button labeled Yes to proceed and restore the default settings
or press No to cancel.
Configure Distributed Audio
The AMS must be configured for distributing audio to connected rooms. This is done
through the Distributed Audio menu.
48 • Media System: Adagio AMS Operations Guide – DOC. 6509B