Specifications

Crestron Adagio
®
AMS Media System
Configure Network
Configure Network
Do you want to install
a CEN-IDOC in your
system?
Yes No
SOURCE
ROOM
HOUSE
MENU
SURRND
THEATER
DISPLAY
MORE
• To install a CEN-IDOC, press the soft button labeled Yes and follow the
instructions onscreen. Otherwise, press the soft button labeled No. The
name of the CEN-IDOC will be used in place of “Source 5” in the list of
sources.
After installing the CEN-IDOC, there will be a prompt asking to assign the
CEN-IDOC to a theater source. Press the soft button labeled Yes to accept
the source assignment or press the soft button labeled No to skip the source
assignment. A source assignment can be chosen while configuring the
theater. Refer to “Configure the Theater” below for more information.
• To install an AAS, press the soft button labeled Yes and follow the
instructions onscreen. Otherwise, press the soft button labeled No. The
source names will be renamed as follows:
⇒ Source 7 becomes “Server 1”
1,2
⇒ Source 8 becomes “Server 2”
1,2
⇒ Source 9 becomes “Server 3”
2
⇒ Source 10 becomes “Server 4”
2
1: AAS-2 model
2: AAS-4 model
NOTE: When installing an AAS, only one AAS can be present on the
network.
After installing the AAS, there will be a prompt asking to assign the outputs
of the AAS to theater sources. Press the soft button labeled Yes to accept
the presented source assignments or press the soft button labeled No to skip
the source assignment. A source assignment can be chosen while
configuring the theater. Refer to “Configure the Theater” below for more
information.
• Press MENU to return to the Installer Tools menu.
Configure the Theater
The theater room must be configured to match the theater’s speaker arrangement and
to designate sources for each theater function. This is done through the Configure
Theater menu.
• Open Installer Tools as described on page 41, select Configure Theater,
and press the ENTER button.
Operations Guide – DOC. 6509B Media System: Adagio AMS • 43