Specifications

Media System Crestron Adagio

AMS

⇒ Identify Keypads – Registers APAD devices and C2N-DBF12

keypads that are connected to the system.

⇒ Load APADs – Programs all connected APAD devices to work

with the AMS.

⇒ About – Provides information about the AMS such as IP data,

firmware version, and program information.

To configure the selected option, press the ENTER button.

To exit Installer Tools and save changes to the AMS’ configuration, press

the MENU button.

Select Tuner Format

Select the tuning format to specify the tuning method used by an installed AM/FM

tuner. When using the North American tuner format, the tuner will tune FM

frequencies in 100 kHz steps and AM frequencies in 10 kHz steps. When using the

European tuner format, the tuner will tune FM frequencies in 50 kHz steps and AM

frequencies in 9 kHz steps.

• Open Installer Tools as described on page 41, select Select Tuner Format,

and press the ENTER button

Select Tuner Format Menu

Select Tuner Format

North American

European

SOURCE

ROOM

HOUSE

SURRND

THEATER

DISPLAY

• Use the selection knob to select a tuner format. To cancel and return to the

Installer Tools menu, press the MENU button.

• To confirm, press the ENTER button and return to the Installer Tools

menu.

Configure the Network

The AMS must be configured to recognize devices that communicate over Ethernet

(i.e. AAS, CEN-IDOC).

• Open Installer Tools as described on page 41, select Configure Network,

and press the ENTER button.

42 • Media System: Adagio AMS Operations Guide – DOC. 6509B