Specifications

Crestron Adagio
®
AMS Media System
Labels for Six-Room Distributed Audio
RightLeft
Adagio Composer or Crestron Engraver software can also be used to create and print
custom labels on overhead transparency film for the AMS’ room buttons and
function buttons.
NOTE: When printing custom labels, some experimentation may be required for
optimum results.
Custom-engraved labels can also be ordered from Crestron. Contact Crestron for
more information.
To remove the label:
1. Remove the label cover with a small, flat-head screwdriver. The label cover
is magnetically attached to the front panel of the Adagio component. The
label strip will be exposed.
2. Insert the screwdriver behind the label strip as shown in the diagram below.
Operations Guide – DOC. 6509B Media System: Adagio AMS • 39