Specifications

Media System Crestron Adagio
®
AMS
Adagio Tuner Cards
If optional Adagio tuner cards are installed, refer to the latest version of the
respective tuner card’s Installation Guide for information on connecting the required
antenna(s).
WARNING: Tuner cards must not be installed or removed when the AMS is
connected to AC power. Failure to disconnect AC power prior to installing or
removing tuning cards may damage the AMS or the tuner card(s).
NOTE: If using the AMS’ out-of-the-box functionality, only two tuner cards can be
installed. The tuner cards must be installed in slots 1 and 2.
Source input ports 1 and 2 are unavailable for other sources when a tuner card is
installed in slot 1. Source input ports 3 and 4 are unavailable for other sources when
a tuner card is installed in slot 2. Source input ports 5 and 6 are unavailable for other
sources when a tuner card is installed in slot 3.
When tuner cards are installed in an AMS that is connected to an AAE, loop-through
output ports 1 through 6 on the AMS are connected to source input ports 1 through 6
on the AAE.
AMS Control Devices
Any combination of six AMS control devices such as the APAD or the C2N-DBF12
can be simultaneously connected to the powered NET ports located on the upper-left
side of the rear panel. An additional APAD can also be connected to a NET port for
control of the theater room. Refer to the following diagram and “Network Wiring”
on page 20 for wiring information when connecting either APAD devices or
C2N-DBF12 keypads.
36 • Media System: Adagio AMS Operations Guide – DOC. 6509B