Specifications

Crestron Adagio
®
AMS Media System
CAUTION: All tuner cards should be securely installed in the AMS.
CAUTION: Devices such as the AAS and the AAE must be fully grounded to the
AMS. Additionally, any other source devices should be grounded to the AMS as
well.
NOTE: The AMS can only be powered by the included power cord. Power cannot
be supplied from network devices that are connected to the mini-terminal block
connectors.
NOTE: The AMSI (International version) requires a power cord that is harmonized
to the country’s national and local electrical code. Each inner wire in the cord should
be at least 16 AWG or (1.5 mm
2
) and rated for at least 500V.The temperature rating
of the cord should be at least 60ºC. The cord length should be 1.5 meters to 2 meters.
Custom Program Connections for the AMS (Shown with Tuner Cards in Slots 1 & 2)
PRE-AMP OUT (RCA):
CARRIES LINE-LEVEL
UNBALANCED AUDIO.
FOLLOWS SPEAKER OUTPUTS
POWER:
FROM LINE
VOLTAGE
AUDIO INPUTS:
FROM MULTI-CHANNEL
SOURCES, ANALOG
SOURCES, AND DIGITAL
(COAX/FIBER OPTIC)
SOURCES
NET:
POWERED PASS-
THROUGH TO APAD and
C2N-DBF12 DEVICES
IR OUT:
TO STIRP IR EMITTER PROBE
or ONE-WAY SERIAL
CONTROLLED DEVICES
RELAY OUTPUT:
TO CONTROLLABLE
DEVICES
INPUT:
FROM DEVICE OUTPUTS
CONTACT OR RELAY CLOSURES
(24 VOLTS MAX)
IR IN:
FROM
CNXRMIRD IR
RECEIVER
COM A & COM B:
BI-DIRECTIONAL RS-232 WITH
HARDWARE & SOFTWARE
HANDSHAKING AND MODEM CONTROL
COMPUTER:
TO PC
LAN:
10/100 BASE-T
ETHERNET TO LAN
NET:
TO AAE(s)
GROUND:
TIE ALL SOURCE AND AAE
GROUNDS TO AMS
GROUND TERMINAL
VIDEO INPUT/OUTPUT:
INPUT FROM
COMPONENT,
S-VIDEO, AND
COMPOSITE SOURCES;
OUTPUT TO
COMPONENT,
S-VIDEO, AND
COMPOSITE DEVICES
HDMI:
INPUTS FROM HDMI SOURCES
and OUTPUT TO HDMI
RECEIVER/DISPLAY
TO ROOM SPEAKERS:
EACH PAIR OF SPEAKER OUTPUTS
CORRESPONDS TO A ROOM NUMBER.
TO THEATER SPEAKERS AND/OR ROOMS 5 & 6:
ROOMS 5 & 6 ARE AVAILABLE WITH CERTAIN THEATER
CONFIGURATIONS
NOTE: A USB port is concealed behind the label cover on the front panel. The USB
port is used to connect with a PC and provides a console connection to the AMS. A
microphone jack is also concealed behind the front panel’s label cover. This jack is
used to connect the microphone that is included with the available Crestron
Professional Surround Sound Tuning Kit. For more information, refer to the latest
version of the Crestron Professional Surround Sound Tuning Kit Operations Guide
(Doc. 6565) which can be downloaded from the Crestron website.
Operations Guide – DOC. 6509B Media System: Adagio AMS • 35