Specifications

Media System Crestron Adagio
®
AMS
Hardware Connections for Out-of-the-Box Functionality (Shown with Tuner Cards in Slots 1 & 2)
APAD
LAN:
CONNECT TO DHCP ROUTER;
REQUIRED FOR USE WITH
CEN-IPOD and AAS
NET:
TO AAE
(OPTIONAL)
TO ROOM SPEAKERS:
EACH PAIR OF SPEAKER OUTPUTS
CORRESPONDS TO A ROOM NUMBER.
APAD
GROUND:
TIE ALL SOURCE AND AAE
GROUNDS TO AMS
GROUND TERMINAL
POWER:
FROM LINE
VOLTAGE
C2N-DBF12 C2N-DBF12 C2N-DBF12 C2N-DBF12
TO THEATER SPEAKERS AND/OR ROOMS 5 & 6:
ROOMS 5 & 6 ARE AVAILABLE WITH CERTAIN THEATER
CONFIGURATIONS
AUDIO INPUTS:
FROM MULTI-CHANNEL
SOURCES, ANALOG
SOURCES, AND
DIGITAL (COAX/FIBER
OPTIC) SOURCES
VIDEO INPUT/OUTPUT:
INPUT FROM
COMPONENT,
S-VIDEO, AND
COMPOSITE
SOURCES;
OUTPUT TO
COMPONENT,
S-VIDEO, AND
COMPOSITE DEVICES
HDMI:
INPUTS FROM HDMI SOURCES
and OUTPUT TO HDMI
RECEIVER/DISPLAY
PRE-AMP OUTPUT:
THEATER and STEREO
DOWNMIX OUTPUT TO AAE,
AMPLIFIERS, OR AMPLIFIED
SPEAKERS
Refer to the following diagram to properly connect devices using an HDMI cable.
Installing and HDMI Cable
Custom Program
Connections
Refer to the following when not using the out-of-the-box functionality:
WARNING: To prevent injury and / or equipment damage due to electric shock,
disconnect power from the AMS prior to making any wiring connections.
Make the necessary connections as called out in the illustration that follows this
paragraph. Refer to “Network Wiring” on page 20 before attaching the 4-position
terminal block connectors. Apply power after all connections have been made.
34 • Media System: Adagio AMS Operations Guide – DOC. 6509B