Specifications

Media System Crestron Adagio
®
AMS
Connectors, Controls, & Indicators (Continued)
# CONNECTORS,
CONTROLS, &
INDICATORS
DESCRIPTION
35 LAN
(1) 8-wire RJ-45 with 2 LED indicators,
10/100BaseT Ethernet port;
Green LED indicates link status, Yellow
LED indicates Ethernet activity
36 NET
(2) 4-pin 3.5mm detachable terminal
blocks; Cresnet Master ports, paralleled
with NET ports 1 through 6; Connect to
AAE(s). A four-pin terminal block interface
connector is included for each port.
37 AUDIO OUT
OUTPUT:
(2) RCA female; Unbalanced stereo line-
level audio output containing a stereo
downmix of all internal surround sound
processor outputs;
Maximum Output Level: 2.5 V
rms
;
Output Impedance: 50 ohms
PRE-AMP OUTPUT:
(8) RCA female; Unbalanced line-level 7.1
surround sound audio outputs;
Maximum Output Level: 2.5 V
rms
(front,
surround, back, center); 6.3 V
rms
(sub);
Output Impedance: 50 ohms
SUB (balanced):
(1) 3-pin 3.5mm detachable terminal block;
Balanced line-level subwoofer audio
output;
Maximum Output Level: 12.6 V
rms
;
Output Impedance: 100 ohms
NOTE: Stereo downmix output is not
affected by changes to volume. Pre-amp
surround sound outputs are affected by the
volume control.
38 HDMI
HDMI INPUT 1-3:
(3) 19-pin Type A HDMI 1.1 digital
video/audio input; includes HDCP 1.1
protocol
HDMI OUTPUT:
(1) 19-pin Type A HDMI 1.1 digital
video/audio output; includes HDCP 1.1
protocol
39 MAIN POWER INPUT Fuse terminal and power connector.
The AMS requires a T10AH-type fuse rated
at 250 Volts
1
. The AMS requires 120 VAC,
50-60 Hz, 8 Amps.
The AMSI requires a T5AH-type fuse rated
at 250 Volts
1
. The AMSI requires 220-240
VAC, 50-60 Hz, 4 Amps
2
.
1. Refer to “Fuse Replacement” on page 38 for additional details.
2.
Refer to “Hardware Hookup”, which begins on page 20 for additional cord details.
18 • Media System: Adagio AMS Operations Guide – DOC. 6509B