Specifications

Media System Crestron Adagio
®
AMS
Connectors, Controls, & Indicators (Continued)
# CONNECTORS,
CONTROLS, &
INDICATORS
DESCRIPTION
28 SPEAKER OUTPUTS
ROOM 1-4:
(8) 2-pin 7.62mm detachable terminal
blocks; Multi-room amplifier outputs;
Wire Size: Terminals accept up to
12 AWG (4.0 mm
2
); Interface
connectors included.
Output Power: 45 Watts/Ch. at 8 ohms,
60 Watts/Ch. at 4 ohms
FRONT, CENTER, SURROUND, BACK or
ROOM 5/6:
(7) 2-pin 7.62mm, 20A detachable terminal
blocks; Power amplifier outputs;
Wire Size: Terminals accept up to
10 AWG (3.0 mm
2
); Interface
connectors included.
Output Power: 100 Watts/Ch. at
8 ohms, 150 Watts/Ch. at 4 ohms
29 IR OUT
(8) 3.5mm TRS mini-phone jack, IR/Serial
port;
IR output up to 1.2 MHz; 1-way serial
TTL/RS-232 (0-5V) up to 9600 baud
Use Crestron Infrared Emitter Probe (part
number STIRP, sold separately) for
controlling infrared devices. For information
on other serial control cables, contact
Crestron.
Tip
Ring
Sleeve
Tip: IR Data Out
Ring: No Connection
Sleeve: Ground
30 IR IN (1) 3.5 mm TRS mini-phone jack;
For connection of the CNXRMIRD IR
receiver (sold separately);
Allows IR wireless control from Crestron
and third-party remotes using RC-5 IR
commands.
Tip
Ring
Sleeve
Tip: IR Data In
Ring: +5 VDC
Sleeve: Ground
(Continued on following page)
16 • Media System: Adagio AMS Operations Guide – DOC. 6509B