Specifications

ManualsBrandsCrestron ManualsComputer equipmentSurround Sound Tuning Kit

PSPHD PROCISE

7.3 High-Deﬁnition Professional Surround Sound Processor

crestron.com

800.237.2041

MIXER INPUT 1 – 3: (3) 3-pin 3.5mm detachable terminal blocks;

Balanced/unbalanced line-level inputs;

Input Impedance: 22k Ohms balanced, 11k Ohms unbalanced;

Maximum Input Level: 4 Vrms balanced/unbalanced

OUTPUT (unbalanced) LEFT, RIGHT, SURR L., SURR R., SURR BL., SURR

BR., CENTER, SUB 1, SUB 2, SUB 3: (10) RCA female;

Unbalanced line-level 7.3 surround sound audio output;

Output Impedance: 100 Ohms;

Maximum Output Level: 4 Vrms

OUTPUT (balanced) LEFT, RIGHT, SURR L., SURR R., SURR BL., SURR BR.,

CENTER, SUB 1, SUB 2, SUB 3: (10) 3-pin XLR male;

Balanced line-level 7.3 surround sound audio output;

Output Impedance: 200 Ohms;

Maximum Output Level: 8 Vrms

DOWNMIX OUT (unbalanced) LEFT/RIGHT: (2) RCA female;

Unbalanced line-level stereo audio output;

Output Impedance: 100 Ohms;

Maximum Output Level: 4 Vrms

DOWNMIX OUT (balanced) LEFT/RIGHT: (2) 3-pin XLR male;

Balanced line-level stereo audio output;

Output Impedance: 200 Ohms;

Maximum Output Level: 8 Vrms

DOWNMIX OUT (unbalanced) MONO: (1) RCA female;

Unbalanced line-level mono audio output;

Output Impedance: 100 Ohms;

Maximum Output Level: 4 Vrms

DOWNMIX OUT (balanced) MONO: (1) 3-pin XLR male;

Balanced line-level mono audio output;

Output Impedance: 200 Ohms;

Maximum Output Level: 8 Vrms

LAN: (1) 8-wire RJ45 with 2 LED indicators;

10Base-T/100Base-TX Ethernet port;

Green LED indicates link status;

Yellow LED indicates Ethernet activity

NET: (2) 4-pin 3.5mm detachable terminal blocks;

Cresnet slave ports, paralleled

100-240V~50-60Hz 65W: (1) IEC C14 male chassis plug;

Mates with removable power cord (included)

G: (1) 6-32 screw, chassis ground lug

Microphone (front): (1) 3-pin mini-XLR, female (behind front panel);

Input for calibrated microphone (part of CSSTK Surround Sound Tuning Kit,

sold separately)

USB (front): (1) USB Type B female (behind front panel);

USB computer console port (cable included)

Displays

(2) 256 x 64 graphic VFDs (Vacuum Fluorescent Displays); Left display

shows source, decoding mode, setup, info, and installer menus;

Right display shows volume levels; Both displays can show real-time VU

meters or spectrum analyzers

Controls & Indicators

Selection Knob (left): (1) rotary encoder with integral pushbutton, used to

navigate and select various menu options and adjust values

STANDBY: (1) pushbutton and red LED, places PSPHD (and PROAMP if

connected) into “Standby” mode (all outputs turned off)

SOURCE: (1) pushbutton, enters the source selection menu

MODE: (1) pushbutton, enters the decoding mode selection menu

SETUP: (1) pushbutton, enters the compression and equalization setup

INFO: (1) pushbutton, enables display of source information

HOME: (1) pushbutton, returns both displays to their default screens

showing the current source and decoding mode (left) and volume (right)

DISPLAY: (1) pushbutton, normally sets the front panel display brightness;

pressing DISPLAY and HOME simultaneously for 5 seconds enters the

installer menu

METER: (1) pushbutton, enables dual analog meter display

SPECTRUM: (1) pushbutton, enables dual spectrum analyzer display

LEVEL: (1) pushbutton, enables display of speaker volume levels

AMPLIFIER: (1) pushbutton, enables display of amplifier status (if PROAMP

is connected)

Volume Knob (right): (1) rotary encoder with integral pushbutton, turn to

adjust master volume level, press to display master volume level

MUTE: (1) pushbutton and red LED, mutes all outputs

RESET: (1) miniature pushbutton (behind front panel), hardware reset

SETUP (rear): (1) recessed miniature pushbutton and (1) red LED, used for

touch-settable ID (TSID) in conjunction with Crestron Toolbox

™

software

Power Requirements

Main Power: 65 Watts @ 100-240 Volts AC, 50/60 Hz

Cresnet Power Usage: none, does not draw Cresnet power

Environmental

Temperature: 41° to 104°F (5° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

Heat Dissipation: 225 BTU/Hr

Enclosure

Chassis: Metal, vented sides, ultra-quiet speed-controlled fan cooling

Front Panel: Aluminum with plastic overlay

Mounting: Freestanding or 3U 19-inch rack-mountable (detachable feet

and rack ears included)

Dimensions

Height: 5.74 in (146 mm);

5.19 (132 mm) without feet

Width: 17.28 in (439 mm);

19.0 in (483 mm) with ears

Depth: 14.75 in (375 mm)