Specifications

Current Sensor Module Crestron ST-CS
The System Views lower pane displays the PRO2 system tree (refer to the following
graphic). This tree can be expanded to display and configure the communication
ports.
Expanded PRO2 System Tree
C2Net-Device Slot in Configuration Manager
To incorporate an ST-CS into the system, drag the ST-CS from the Cresnet Control
Modules | Cresnet I/O Control & Other Modules folder of the Device Library and
drop it in System Views. The PRO2 system tree displays the ST-CS in Slot 9, with a
default Net ID of 18 as shown in the following illustration.
NOTE: The first ST-CS in a system is preset with a Net ID of 18 when its symbol is
dragged into the upper pane of System Views. Additional ST-CS units are assigned
different Net ID numbers as they are added.
C2Net Device, Slot 9
Setting the Net ID in Device Settings
Double-click the ST-CS icon to open the “Device Settings” window. This window
displays the ST-CS device information. If necessary, select the Net ID tab to change
the Net ID as shown in the following figure.
12 • Current Sensor Module: ST-CS Operations Guide - DOC. 5677A