Crestron ST-1550 & 1550C 1-Way Wireless RF Touchpanels Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc.
Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels Contents 1-Way Wireless RF Touchpanels: ST-1550 & St-1550C 1 Introduction ............................................................................................................................... 1 Leading Specifications ................................................................................................ 2 Industry Compliance ...................................................................................................
Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels 1-Way Wireless RF Touchpanels: ST-1550 & ST-1550C Introduction This Operations Guide for the 1-Way Wireless RF Touchpanels ST-1550 & ST-1550C (the touchpanel) is intended for authorized Crestron™ Dealer/ Programmers. The guide focuses on the configuration and programming functions that allow you to customize the touchpanel to satisfy the system requirements and to suit the preferences of the end user.
1-Way Wireless RF Touchpanels Crestron ST-1550 & ST-1550C Leading Specifications The table below provides a summary of leading specifications for the touchpanels. Leading Specifications of the ST-1550 & ST-1550C Touchpanels SPECIFICATION Power Options ST-BTP (or equivalent) DETAILS Rechargeable NiCad battery pack (included) (Fully charged, 2800 mAh capacity. Operating time 1 depends on usage.) AC: Domestic External Adapter AC: International External Adapter 12VDC, 1.
Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels Industry Compliance As of the date of manufacture, this unit has been tested and found to comply with specifications for CE marking and standards per EMC and Radio Communications Compliance Labeling (N11785) NOTE: This device complies with part 15 of the FCC rules.
1-Way Wireless RF Touchpanels Crestron ST-1550 & ST-1550C Configuring the Touchpanel (Advanced Settings Screen) Opening Screen for ST-1550 (top) and ST-1550C (bottom) It may be necessary to make adjustments or configure the touchpanel to accommodate the preferences of the end user. Descriptions for preferences and power management settings of the touchpanel are provided in the latest revision of the SmarTouch Touchpanel User’s Operations Guide (Doc. 5804).
Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels Daylight Savings Daylight Savings Screen To access the Daylight Savings Screen, shown to the left of this paragraph, touch the Daylight Savings button from the Advanced Settings Screen. Two options are available: Set Daylight Savings Time Northern Hemisphere and Set Daylight Savings Time Southern Hemisphere. Each button can be toggled (ON/OFF states).
1-Way Wireless RF Touchpanels Crestron ST-1550 & ST-1550C Programming The touchpanel provides wireless RF user interface in either a Cresnet control system or a SmarTouch control system. Have a comment about Crestron software? Direct software related suggestions and/or complaints to Crestron via email (software@crestron.com). Do not forward any queries to this address. Instead refer to “Further Inquiries” on page 18 for assistance.
Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels reoccur as programmed. An event is defined as the actions initiated by one sequence or a single button function. DEFINITIONS: Function: A single button press (join number 1 through 999), which typically triggers one or more commands to be sent from the control system. Sequence: A series of button presses that can be recorded and played back in real time.
1-Way Wireless RF Touchpanels Obtain the latest version of VT Pro-e from the Downloads | Software Updates section of the Crestron website (www.crestron.com) Sequences + Scheduler Page Learn Sequence #1 Page Crestron ST-1550 & ST-1550C There are two buttons with reserved join numbers that must be touched when developing a sequence. These buttons exist on the Home | Sequences + Scheduler part of the Application Builder template, “st-1550c basic.
Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels Sequences + Scheduler Page 1. Touch the Schedule Event button (reserved join number = 3424) from the Sequences + Scheduler page, shown to the left of this step. Schedule Event #1 Page 2. Touch any button with a digital join number. The button may be one that has a programmed sequence or one that initiates a specific function (join number 1 through 999).
1-Way Wireless RF Touchpanels Schedule Event #3A Page 9. Crestron ST-1550 & ST-1550C The event time and date have been properly set up in the basic schedule. Touch the Select Schedule button to open the Schedule Event #3A page, shown to the left of this step. Notice that this page has five schedules defined on the screen. To gain access to five more schedules, touch the “More” button. 10. Determine the schedule that you want to use and touch that line.
Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels (i.e., windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. SIMPL Windows offers drag and drop functionality in a familiar Windows® environment. This section describes a sample SIMPL Windows program that includes a touchpanel. Configuration Manager is where programmers “build” a Crestron control system by selecting hardware from the Device Library.
1-Way Wireless RF Touchpanels Crestron ST-1550 & ST-1550C C2Net Device, Slot 9 Double-click the CNRFGWA icon in the upper pane to open the “Device Settings” window. This window displays CNRFGWA device information. Select the Net ID tab to change the gateway Net ID, as shown in the following figure. Device Settings Window for the CNRFGWA Similarly, expand the system tree in the lower pane and double-click the ST-1550 icon to open the “Device Settings” window for the touchpanel.
Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels Touchpanel Device Settings Window ST-1550 Symbol in Programming Manager Programming Manager is where programmers “program” a Creston control system by assigning signals to symbols. The following diagram shows the ST-1550 symbol in the SIMPL Windows’ Programming Manager. Detail View of the ST-1550 in SIMPL Windows’ Programming Manager The table below lists and gives functional descriptions for the touchpanel outputs.
1-Way Wireless RF Touchpanels Crestron ST-1550 & ST-1550C (ST-1550) control environment with custom control graphics: icons, two and threedimensional buttons, and floor plans. The project is uploaded to the touchpanel’s flash PROM. The touchpanel uses the project until another is uploaded from the PC. The PC may be disconnected from the control processor except when uploading a project. For additional software information, refer to the help file provided with the software.
Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels NOTE: If the control system in use has a 4-pin network connector rather than a modular (RJ11-type) NET connector, use an ST-CBL (sold separately) or make a cable. Refer to the cable specifications, shown after the following steps. 1. Before making any connections to the touchpanel, verify that control system is properly connected to the PC (using cable 15717 and adapter) and powered on. 2.
1-Way Wireless RF Touchpanels Crestron ST-1550 & ST-1550C Reserved Join Numbers for SmarTouch Touchpanel JOIN NUMBER FUNCTION VALUE 1015 1016 1017 1018 1019 1023 1024 1035 1036 1120 - 1123 1160 1161 1172 1173 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3200 - 3327 Power Stand by Brightness Brightness Brightness Contrast Contrast Reboots the System * Discharges ST-BTP ** Digital Battery Bargraph Keyclick Volume Keyclick Volume Keyclick Keyclick Scheduler Scheduler Scheduler S
Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels Problem Solving Troubleshooting The table below and on the next page provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. SmarTouch Touchpanel Troubleshooting TROUBLE POSSIBLE CAUSE(S) Project can not be uploaded to touchpanel: 1. Screen is black. Touchpanel is in standby or powered down. 2. Checking Incorrect COM port communications specified.
1-Way Wireless RF Touchpanels Crestron ST-1550 & ST-1550C SmarTouch Touchpanel Troubleshooting (Continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Touchpanel does Touchpanel RF ID is Verify that RF ID match. Refer to "Interface" in this not function and RF not set to match the Operations Guide and RF ID parameters assigned LED on ST-CP RF ID assigned in in the program. illuminates, but COM the SmarTouch or IR LEDs do not system program. illuminate. Touchpanel display is dark or too light.
Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and, as applicable, associated media, printed materials, and “online” or electronic documentation (the “Software”).
1-Way Wireless RF Touchpanels Crestron ST-1550 & ST-1550C If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
1-Way Wireless RF Touchpanels Crestron ST-1550 & ST-1550C This page intentionally left blank. 22 • 1-Way Wireless RF Touchpanels: ST-1550 & ST-1550C Operations Guide – DOC.
Crestron ST-1550 & ST-1550C 1-Way Wireless RF Touchpanels This page intentionally left blank. Operations Guide - DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 5803A 05.02 Specifications subject to change without notice.
