Specifications

1-Way Wireless RF Touchpanel Crestron ST-1550C
Programming Cable Specifications
1. Before making any connections to the touchpanel, verify that the
control system is properly connected to the PC (using ST-PK cable
15717 and adapter) and powered on.
2. Attach the stereo connector end of the ST-PK cable 15710, to the
touchpanel.
3. Attach the RJ-11 connector end of the ST-PK cable 15710, to the
connector labeled NET on the control system.
4. Attach the appropriate external power pack or equivalent to touchpanel
and plug into outlet. At the PC, make sure that no programs accessing
the COM port of the PC are running.
5. Open the Crestron Viewport.
Either launch the stand-alone version of Viewport, or start SIMPL
Windows or VT Pro-e, and from the menu bar, select Tools |
Viewport.
6. From the Viewport menu, select Setup | Communications settings
(alternatively, press Alt+D) to open the “Port Settings” window. Refer
to the figures on the next page.
26 • 1-Way Wireless RF Touchpanel: ST-1550C Operations Guide – DOC. 6096A