Specifications

Crestron ST-1550C 1-Way Wireless RF Touchpanel
Typical Connection Diagram when Uploading a Project from the PRO2 or equivalent
NOTE: If the control system in use has a 4-pin network connector rather than a
modular (RJ-11 type) NET connector, use an ST-CBL cable (sold separately).
NOTE: To make a cable for either configuration, refer to the “Programming Cable
Specifications” diagram after these notes.
NOTE: An adapter such as a CN-RJ11 (sold separately) is required when using the
RJ-11 cable.
NOTE: The RJ-11 (part of ST-PK) and ST-CBL cables can also be found as part
numbers CNSP-585 and CNSP-586, respectively, in the Crestron cable database. The
database can be downloaded from the Crestron website.
Operations Guide – DOC. 6096A 1-Way Wireless RF Touchpanel: ST-1550C • 25