Specifications

Crestron ST-1550C 1-Way Wireless RF Touchpanel
Reserved Join Numbers for ST-1550C Touchpanel
JOIN NUMBER FUNCTION
V
ALUE
1015 Power Off
1016 Stand by On
1017 Brightness Low
1018 Brightness Medium
1019 Brightness High
1023 Contrast Up
1024 Contrast Down
1035 Reboots the System * N/A
1036 Discharges ST-BTP ** N/A
1120 - 1123 Digital Battery Bargraph
Gauge Bottom (1120) to Gauge Top (1123)
1160 Keyclick Volume
Up
1161 Keyclick Volume
Down
1172 Keyclick
On
1173 Keyclick
Off
3076 Time & Date Adjustment
Increment Minutes
3077 Time & Date Adjustment
Decrement Minutes
3078 Time & Date Adjustment
Increment Hours
3079 Time & Date Adjustment
Decrement Hours
3080 Time & Date Adjustment
Increment Days
3081 Time & Date Adjustment
Decrement Days
3082 Time & Date Adjustment
Increment Months
3083 Time & Date Adjustment
Decrement Months
3084 Time & Date Adjustment
Increment Years
3085 Time & Date Adjustment
Decrement Years
3360 Time & Date Adjustment
Set Scratchpad Time & Date to Touchpanel's
Current Time & Date
3361 Time & Date Adjustment
Save Settings
* Holding a button (assigned with join number 1035) for more than five seconds places the touchpanel into
"setup mode". Use this mode to configure the touchpanel.
** While discharging, the touchpanel backlight is set to maximum and the timeouts are disabled.
NOTE: If designing an analog battery gauge bargraph, it can be displayed with any
of the standard command text on analog channel 2. Therefore, `A2 displays the
gauge as a bargraph that fills bottom to top. `D2 displays a bargraph that fills left to
right. Obtain the latest version of VT Pro-e from the Crestron website.
Uploading and Upgrading
NOTE: Crestron recommends that you use the latest software and that each device
contains the latest firmware to take advantage of the most recently released features.
Please check the Crestron website (http://www.crestron.com/updates
) for the latest
versions of software and firmware. New users are required to register to obtain
access to this site.
Assuming a PC is properly connected to the entire system, Crestron programming
software allows the programmer to upload programs and projects to the system and
touchpanel after their development. However, there are times when the files for the
program and projects are compiled and not uploaded. Instead, compiled files may be
distributed from programmers to installers, from Crestron to dealers, etc. Even
Operations Guide – DOC. 6096A 1-Way Wireless RF Touchpanel: ST-1550C • 23