Technical information

Software Crestron SIMPL™ Windows
Trace Window
Pause Trace
Alt+P Suspends Incoming Signal transitions in the
Trace Window
Clear
Alt+C Clear All Signal Transitions from the Trace
Window
Add Signal to Status
Window
Add Selected Signals in the Trace Window to the
Status Window
Exclude Signals from
Trace Window…
Do Not Trace These Signals
Trace All Signals
Show All Signal Transitions
Trace Only Signals in
Status Window
Show only the Transitions of Signals that are in
the Status Window
Macro Trace On
Show the Signal Transitions of Signals that are in
Macros
Macro Trace Off
Hide the Signal Transitions of Signals that are in
Macros
Show Analogs in
Trace Window
Include Analog Signals in Trace Window
Show Serials in Trace
Window
Include Serial Signals in Trace Window
Insert Time Stamp
Alt+T Insert a Time Stamp Placeholder in the Trace
Window
Put Time Stamp on All
Si
g
nals
Insert a Time Stamp Placeholder on all Signals in
the Trace Window
Save To Disk
Save Signal Transitions in the Trace Window to a
User S
p
ecified File
Log To Disk
As Signal Transitions Occur, Put Them in a User
S
p
ecified File
(
Even When in Pause Mode
)
Options
Reset Rack
Issue a Command to the Rack to Soft Reset the Rack
Synchronize with
Rack
Synchronize the State of Signals in the Status Window
with the Rack (This Command Results in False Data
Bein
g
Added to the Trace Window
)
Find Rack
Locate the Rack at a Different Baud Rate and Switch it to
the Currentl
y
Set Baud Rate of the PC
Show Analogs as
Percent
Toggle Between Showing an Analog Signal's Value as a
Percentage or a Number Between 0 and 65535 in the
Trace and Status Windows
Show Signals as
HE
X
Toggle Between Showing an Serial Signal in HEX Format
or as a Raw Strin
g
in the Trace and Status Windows
Help
Help Topics
Show help Topics
About Test Manager
Show About Box with Test Manager Version
166
• Crestron SIMPL Windows Installation & Operations Guide – DOC. 5728