Technical information

Crestron SIMPL™ Windows Software
Page
Add/Edit Object
Add New or Edit Existing Object
Delete Object
Delete Selected Object
Center Object
Center Selected Object
Test Manager
File
Open
Ctrl+O Open a SIMPL Windows SMW file or a SIG file
Save Program
Ctrl+S NOT IMPLEMENTED AT THIS TIME
Save Incoming Data
Save All Data in the Incoming Data Window to a
User S
p
ecified File
Exit
Exit Test Manager
Edit
Copy
Ctrl+C Copy Selected Data in the Incoming Data
Window to the Cli
p
board
Clear Incoming Data
Ctrl+I Clear All Data in the Incoming Data Window
Port Settings
Alt+D Set the Communications Settings (COM Port,
Baud Rate, etc.
)
View
Toolbar
Toggle to View Toolbar
Status Bar
Toggle to View Status Bar
Status Window
Add Signal
Brings Up a Dialog to Add Signals to the Status
Window
Add Selected Signals
from Trace Window
Adds the Selected Signals to the Status Window
Remove Signal
Remove Selected Signals from the Status Window
Remove All Signals
Remove All Signals from the Status Window
Assert Signals
Assert the Selected Signals in the Status Window
De-Assert Signals
De-Assert the Selected Signals in the Status Window
Positive Pulse Signals
Assert then De-Assert the Selected Signals in the
Status Window
Negative Pulse Signals
De-Assert then Assert the Selected Signals in the
Status Window
Save To Disk
Save Information in the Status Window to a User
S
p
ecified File
Bookmarks
Saves/Restores the Current Window Positions for
Visual Ease
Installation & Operations Guide – DOC. 5728C Crestron SIMPL Windows
• 165