System information

Fixes/Changes from 2.05.19 to 2.05.20 - PUBLIC FTP SITE RELEASE:
SIMPL Windows: Fixed problem with not being able to swap Serial Devices within a Serial Card or across cards.
SIMPL Windows: Fixed problem in printing error logs. Sometimes multiple copies of the same log was being printed.
Test Manager (version 2.04.02): Fixed problem with what appeared to be the Trace Window was being forced into
Scroll Lock mode.
Fixed possible string overflow error when calling a function that returns a string (STRING_FUNCTION) within library
files.
Fixes/Changes from 2.05.18 to 2.05.19:
SIMPL Windows: Updated the Detail View display of parameter cues such that if a param cue has a "==" in it's name
for signifying default values (e.g.p1==1d) only show the actual cue name (e.g. only show 'p1' )
SIMPL Windows: Don't add "Devices with Default Logic" to device library tree if the associated .CMC/.CSP is not in
the Symbol Library.
SIMPL Windows: Resolved issue when a Device name was not being updated if the device comment was changed
on the Program View via the F9 (search/replace) function.
SIMPL Windows: Fixed problem in TIO file reads where 2 instances of Simpl Windows would not be allowed to read
the same .TIO file at the same time.
Test Manager/Network Analyzer: Fixed help so that the correct Help Topic shows up instead of the 1st page of
SIMPL Windows help.
Network Analyzer: Fixed toolbar so that the Y&Z Overlap button isn't greyed out.
SIMPL Windows: Fixed problem with symbol PDF help not showing up when selected in the Detail View
SIMPL Windows: Fixed problem where default logic for devices that have default devices associated below them
(e.g. the CPC-CAMI has a serial driver that should be added) was not getting connected because the default
device was not being added.
SIMPL+: Fixed compiler optimization issue which caused SIMPL+ modules to be compiled even if they were up to
date, which slowed down compilation through SIMPL Windows.
Install: Fix issue where Viewport DLL's were not getting updated by the install.
SIMPL Windows: Resolved issue where the same IR driver would appear multiple times under the User/Project DB
nodes in the Device Library tree.
SIMPL Windows: Resolved issue where some IR drivers were appearing in the Device Library tree with no names. If
there is no model provided by the .IR file, SIMPL Windows will now display "No Model" as the name.
SIMPL+: Correct issue with advisor where WaitForInitializationComplete() did not correctly advise that 3.090 was
the minimum CUZ needed (2 Series only).
SIMPL Windows: Fixed issue when printing the error log (sometimes an entry would get printed multiple times).
SIMPL Windows: Show device extenders for the front panels of various processors (also available in Library Update
273 and later) (2 Series only).
SIMPL Windows: Fix AV2 (with and without card cage) Remote Cresnet/Ethernet processing models - remove slot 8
(which accepts an Ethernet card) from the slave control system model, as networks off of a slave are not allowed
(also available in Library Update 273 and later).
SIMPL Windows: Change default parameter type to hex for the Serial to Analog (OP103) symbol (also available in
Library Update 273 and later) .
SIMPL Windows: Fix complation error when using the SDPMOLD symbol (also available in Library Update 273 and
later) (2 Series Only).
Fixes/Changes from 2.05.17 to 2.05.18:
Internal build only - not released.
Fixes/Changes from 2.05.16 to 2.05.17 - PUBLIC FTP SITE RELEASE:
SIMPL+: Correction for SIMPL+ encryption for X Generation Compiler.
Fixes/Changes from 2.05.15 to 2.05.16: