System information

Fixes/Changes from 2.06.01 to 2.06.02:
SIMPL Windows: Fixed Processing of default RF ID's.
Library Update (v317 and later): Expose the following symbols:
Astroclock with Enable - Requires CUZ 3.132 or later; 2 Series only.
Time Offset with Enable - Requires CUZ 3.132 or later; 2 Series only.
Stepper with Progress & Cancel - Requires CUZ 3.121 or later; 2 Series only.
Double Precision Analog Initialize - Requires CUZ 3.117 or later; 2 Series only.
Double Precision Analog Variable Preset - Requires CUZ 3.117 or later; 2 Series only.
Fixes/Changes from 2.05.22 to 2.06.01:
SIMPL Windows: Fixed problem in System Configuration Tree where dragging an item to drop it somewhere else,
didn't always drag the item that was actually selected.
SIMPL Windows: Fixed Range Checking on Analog Inputs, Analog Outputs and Parameters Property definitions. It
was not allowing decimals in range values.
SIMPL Windows: Fixed Create Archive function to make sure if a file is of type .UMC, that it is looked for in both the
Project and UsrMacro directories before an error is generated. System Builder Export was failing because SIMPL
Windows was thinking the .UMC files should have been in the User DB directory.
SIMPL Windows: Added new property to Analog Inputs, Analog Outputs and Parameters Property defintions. The
new property allows the user to indicate if the data item is Signed or Unsigned.
SIMPL Windows: Fixed problem with Import RSD assiging the first Analog Input to an ~UNUSED~ cue.
SIMPL Windows: Fix issue when trying to Search/Replace signal names in a program that has close to 65k signals,
signals were deleted and disconnected, and symbols were being marked as incomplete.
SIMPL Windows: If program names are longer than 125 chars, make sure the SIMPL Windows title bar shows the
full .SMW name so, chop of chars in the path instead.
SIMPL Windows: Fixed problem where Module Category was getting reset to Miscellaneous on subsequent edits of
the module after the category had been selected and already saved.
SIMPL Windows: Added Help buttons to Program Header dialog, Copy to Compact Flash dialog, Create Archive
Dialog, Import Archive dialog, Enter Password dialog, Import Crestron Module, Find Symbol In Program, Find
Symbol In Library, Front Panel Editor, Front Panel Object Editor, and Find IR file dialogs.
SIMPL Windows: Front Panel Editor - fixed problem where 255 Indirect Text Joins were not being allowed for 2
Series processors.
SIMPL Windows: Fixed issue with '[' ']' being put in module header and causing data to be lost if files were
encrypted.
SIMPL Windows: Fixed problem where changing anything about a Device's configuration (ie. click ok on Config
Dialog) would erase any extended comment that may have existed on the associated symbol. This was rendering
re-import of RSD files unavailable once user set the IP address of the EISC.
SIMPL Windows: Fixed problem with AutoFill rack that occurs when the COM port is being used by some other
application such as Test Manger. When trying to connect for autofill, a very misleading error message was being
displayed instead of telling the user that the problem was due to another application had the port open.
SIMPL Windows: Added support of Default TCP/IP addresses for devices such as TPMC-10, XPanel, UPX-2,
Roomview, ePower Applications and ActiveCNX. If the user adds such a device to their program, the default IP
Address of 127.0.0.1 (the loopback address) will be assigned to that device. They can still edit it in the
configuration dialog.
SIMPL Windows: Fixed a problem when adding devices (specifically an ST-1700C) that have Default RFID's, the
devices were not always getting put at the Default RF ID location.
SIMPL Windows: Added new Configuration Dialogs to prompt user for Upload information. These dialogs will be
present for devices that may have more than one method to upload via (i.e.serial, cresnet and/or ethernet), or that
have a different method of uploading to than than the manner in which the device is connected into the program.
For example: RF devices may have a Serial Upload method and as such, a Serial Upload Settings configuration
dialog will be displayed for such devices. This information is currently ONLY used by the System Manager
application.
SIMPL Windows: Fixed issue with Create Archive not always getting SIMPL+ files when called from System Builder.
SIMPL Windows: Will give operator a Message Box to let them know if an Input/Output/Parameter Property is going
to be deleted on a Module's Default Argument if the signal is deleted or renamed etc.
SIMPL Windows: Made handling of Input and Output Property defintions for Define Arguments cues (on a User
Module) a little more friendly. User should be told when property defintions are going to be deleted due to renaming
of a cue or deleting a cue. Also added capability to copy a single Cue with property definition, to another cue on
the same list (i.e. Input or Output) and have the property data from the cue being copied, be copied to the new cue.
SIMPL Windows: Fixed error in range checking of Parameter values. If the range for a parameter was defined as
one format (e.g. seconds) and the user entered a value in another format, an error was given when it shouldn't
have been.
SIMPL Windows: Fixed problem with Replace Control System sometimes losing RF and IR devices if more than one