System information

Fixes/Changes from 2.06.15 to 2.06.16:
SIMPL Windows: Fixed bug that could potentially cause SIMPL Windows to crash when saving a program file after having
performed a Replace Device. This would only happen when Cresnet Upload Settings have been defined for the device
being replaced.
Fixes/Changes from 2.06.14 to 2.06.15:
SIMPL Windows: Fix issue with compilation of Pro2/Rack2 Front panel where the "Front Panel Status" device
extender outputs would not function if there were no objects defined on the front panel. Now, you don't need any
objects or signals on the front panel for the extender to function. NOTE that the RACK2 has a CUZ issue which
prevents the LinkA_LED, LinkB_LED and Err_LED extender from working, regardless of this fix. This will be
addressed in the next CUZ release after 3.137.
SIMPL Windows: Added capability to stack serial drivers on IR ports if the "Allow Serial Stacking" flag is set in the
Compiler Preferences.
Fixes/Changes from 2.06.12 to 2.06.14:
SIMPL Windows: Internal changes for System Builder.
Viewport: Support for MT-1000C.
Fixes/Changes from 2.06.11 to 2.06.12:
SIMPL Windows: Modify X Generation/ST-CP/CNMS Compilation of RF Transmitters. If the Transmitter is marked as
"Don't Allow RF ID \< 0x10" (typically old/discontinued Transmitters), and the transmitter is dropped in at an ID less
than 0x10, and the Gateway being used is a CNRFGW, then fail with the existing error message CMCVT117. The
addition is for flagging the CNRFGW, specifically. The 2 Series compiler already does this.
SIMPL Windows: Added a checkbox to the Serial Upload, Ethernet Upload and Cresnet Upload configuration dialog
boxes to indicate which Upload Settings should be used for uploads being performed by the Installers Toolbox.
Only one of these checkboxes can be checed at one time for a given device (in the case where a device may have
more than 1 upload method available).
SIMPL Windows: Fixed an error in Import Remote System Definition function that was placing signals with a name of
"1" on the wrong cue.
Fixes/Changes from 2.06.10 to 2.06.11:
SIMPL Windows: Advanced Settings property sheet for Module Header will now default the "Add Template Pages to
System Builder" to be selected.
SIMPL Windows: Advanced Settings property sheet for Module Header will now update the Templates List when the
programmer checks/unchecks the "Show Only Templates for selected Device Family".
SIMPL Windows: Advanced Settings property sheet for Module Header will now update the selected Template to
the Default Template when Device Type changes.
SIMPL Windows: Fixed problem causing Data Integrity Errors in programs built by System Builder that had devices
that had Cresnet Upload Settings dialogs.
Fixes/Changes from 2.06.09 to 2.06.10:
SIMPL Windows: Fixed an error in support of System Builder.
Fixes/Changes from 2.06.08 to 2.06.09:
SIMPL Windows: Resolved an issue with the Cresnet/Ethernet/Serial Upload dialogs that could cause data integrity
errors when loading a .SMW file.