System information

what the Symbol Tree category (#Category in SIMPL+) is not 0. Often modules will be set to 0 if they are
used as part of other modules so as not to clutter up the symbol tree in the Program Manager. If the module
is saved as a user module and compiled with the tree still set to 0, it will not be visible to the programmer.
When commenting out the control system node or the Logic node, SIMPL no longer shows the control system
/ logic node as commented out. This is correct.
Legacy Device Tools
Beginning with SIMPL Windows 2.11.00 and later, to have access to the Viewport, Test Manger and non-Toolbox
version of the Network Analyzer, a separate installation of these tools will be required. This installation is referred to
as the "Legacy Device Tools" package and will install all 3 tools into a separate installation folder (i.e. you will not
be able to install this software into an existing Crestron application folder)
New SIMPL Windows Features
Fixes/Changes from 3.02.03 to 3.02.04:
SIMPL Windows Bug Fixes:
Correct issue for 3 Series where IP ID 01 and 02 would appear on the configuration dialogs for IP devices. It should
start at 03.
SIMPL+ Bug Fixes:
Fixed format specifier translations containing double-backslashes (3-series only).
Allow THREADSAFE keyword to be used with EVENT statements (3-series only).
Set syntax highlighting after creating a new module from a template (SIMPL+ Editor)
Don't allow commas in SIMPL+ module and template names (SIMPL+ Editor)
Fixed IsParameterDefined (3-series)
Modified zip and unzip algorithms to fix possible compilations errors with .LPZ file.
Fixes/Changes from 3.02.01 to 3.02.03:
SIMPL Windows Bug Fixes:
Correct startup hanging issues on the "Optimizing Database" screen or where the dialog that said there were
startup errors would disappear behind the splash screen.
Correct 2 series compilation bug introduced in intermediate 3.02.02 version.
SIMPL+ Bug Fixes:
Push/Release/Change/Wait/Direct socket constructs for 3 Series require firmware v1.001.0011 or later. They will
also require INCLUDE4.DAT version 1.13.0057 or later.
Correct "No output from NVRAM Utility for..." errors after compilation.
Fixes/Changes from 3.01.41 to 3.02.01:
SIMPL Windows Bug Fixes:
ZLIB bug fixes when compiling programs.
SIMPL Compilation now checks to verify that the verison of SIMPL being used meets the needs of INCLUDE4.DAT
from the Device Database.
Fix issue with some temporary writes for INCLUDE4.DAT operations being written to the application directory. This
is only an issue for Windows Vista and Windows 7.
SIMPL+ Enhancements:
3 series compilation changes to support internal thread naming (for use with future SPLUSTASKS command on 3
Series control systems)
SIMPL+ Bug Fixes:
Fix for IsParameterDefined() (3 Series only).