Specifications

QuickMedia™ Receiver Crestron QM-RX
Setting Net IDs in SystemBuilder
SystemBuilder provides a convenient method of selecting and assigning Net IDs
to devices.
1. Ensure that all network devices are connected to the control system.
2. After completing your SystemBuilder program, click the Build and
Upload button
.
SystemBuilder – Finish Window
3. On the Finish window, click the Set Network IDs… button to assign
the network IDs. SystemBuilder provides three methods for assigning
Net IDs.
• Drag and drop a device from the program tree on the left onto the
device in the network tree on the right.
• Right-click a device the program tree on the left and select Setup
from the sub-menu.
• Right-click on a device in the network tree on the right and set the
Net ID directly.
SystemBuilder – Set Network ID Window
● QuickMedia Receiver: QM-RX Operations Guide – DOC. 6333
24