Specifications

Crestron QM-AE QuickMedia™ Audio Extractor
Slot 1 – C2I-AE-GENAUDIO-AUTOCOMP
The General Audio Controls module is built into slot 01 (with Auto
Compensation).
The QM-AE provides four channels of digital audio as follows:
• The two channels of stereo program audio are referred to as LEFT and
RIGHT.
• The two microphone channels are referred to as MIC 1 and MIC 2.
The QM-AE supports up to 192 source gain compensation presets, which allow
for normalization of audio levels between different sources. Each compensation
preset applies to the cable connection between the QM-AE and a specific QM
transmitter.
When auto-compensation is enabled (by setting the <EnableAutoComp> input
high), the audio compensation presets are not used. Instead, the audio
compensation value stored at the QM transmitter for the selected audio source is
propagated to the QM-AE.
NOTE: Mic tone settings apply equally to both microphones.
Detail View, General Audio – Auto Compensation
Operations Guide – DOC. 6331 QuickMedia™ Audio Extractor: QM-AE ●
23