Installation guide

Crestron QM-FTCC-TPS4 FlipTop Touchpanel Computer Center
QM-FTCC-TPS4 Block Diagram
Computer Audio
A/D
Converter
Computer RGB
QM Output
RJ-45
Ethernet
AC Power
Cresnet
MIC 1 MIC 2
Program L
Program R
Video
Input
Gain
A/D
Converter
M
i
c
r
o
p
h
o
n
e
1
M
i
c
r
o
p
h
o
n
e
2
P
h
a
n
t
o
m
P
o
w
e
r
AC Power
Video
Sync
Sensing
Touchpanel & Buttons
QuickMedia Transport System
Using a proprietary signal routing solution, signals such as RGBHV, audio, and
microphone are all transported using a single cable solution called QuickMedia
(QM).
The QM transport system port is capable of managing computer, video, and audio
signals simultaneously through one CresCAT-QM cable, simplifying installations.
Routing CresCAT-QM cable is less expensive and much simpler than routing multi-
colored, multi-conductor coax cable. All Crestron products using the QM transport
system are capable of sending and receiving QM signals via CresCAT-QM cable.
Installation of any QM device is as simple as installing one set of QM wires from
output to input. Installations are flexible, affordable, and fast.
The Crestron QuickMedia cable “CresCAT-QM” contains one low-skew CAT5E
cable and one Cresnet
®
cable in siamese jackets.
Operations & Installation Guide – DOC. 6393 FlipTop Touchpanel Computer Center: QM-FTCC-TPS4 • 3