Installation guide

Crestron QM-FTCC-TPS4 FlipTop Computer Center
FlipTop Touchpanel Computer
Center: QM-FTCC-TPS4
Introduction
Features and Functions
The QM-FTCC-TPS4 FlipTop Touchpanel Computer Center is part of the Crestron
MediaManager line of network devices, room control systems and signal routing
solutions. The unit comprises two separate devices: a touchpanel and a QuickMedia
transmitter, housed in the same mechanical enclosure. The built in TPS-4 touchpanel
is a compact Crestron 3.6-inch touchpanel that provides user interface to a Crestron
®
remote control system (Cresnet
®
system). Although the units share the same Cresnet
connection, they appear as two separate devices on the network, and have no local
interaction.
Functional Summary
• Built-in touchpanel with ten hardkeys*
• 3.6 in (9.15 cm) active color matrix display
• 320x240 screen resolution
• 96MIPs ColdFire processor running Crestron Isys
®
generation firmware
• 16-bit, non-palette graphics
• 64,000-color Crestron Isys engine
• 8 MB of flash (approx. 7MB for user display lists)
• 16 MB of DRAM (Dynamic RAM) for panel firmware
• One AC power passthrough
• One computer RGB connector with component video detect and auto
sync sensing
• One computer audio connector
• One RJ-45 Ethernet port
• Two MIC inputs with phantom power and line level inputs
• One QuickMedia RJ-45 connector
• Two Cresnet connectors
* As an option, a custom-engraved bezel can be designed and obtained by using the Crestron
Engraver software. Version 2.4 and Crestron Database 17.4 or later are available from the
Crestron website (www.crestron.com).
The bright 3.6" active-matrix color touchscreen provides a fully customizable user
interface for control of AV, lighting, screens, volume and more. With 16-bit Isys
Operations & Installation Guide – DOC. 6393 FlipTop Touchpanel Computer Center: QM-FTCC-TPS4 • 1