Installation guide

Crestron QM-FTCC-TPS4 FlipTop Touchpanel Computer Center
“File Transfer” Window
8. When the transfer is complete, the “Firmware” window reopens indicating
the new firmware version. Click Close after the firmware has been
transferred.
NOTE: If problems arise when transferring any Cresnet file (touchpanel
project/firmware), lower the port speed baud rate to 38400 to match the Cresnet bus
speed.
Operations & Installation Guide – DOC. 6393 FlipTop Touchpanel Computer Center: QM-FTCC-TPS4 • 39