Installation guide

FlipTop Touchpanel Computer Center Crestron QM-FTCC-TPS4
Crestron Toolbox – “Address Book” Window
The PC communication settings specified in the address book should match
the protocol that the QM-RMCRX-BA expects. The settings are as follows:
• Port = COM 1 through COM 8. Select the correct COM port on the
PC.
• Baud rate = Auto Detect.
• Parity = None.
• Number of data bits = 8.
• Number of stop bits = 1.
• Hardware handshaking (RTS/CTS) enabled.
• Software handshaking (XON/XOFF) not enabled.
2. After setting the correct parameters, click OK to return to the Crestron
Toolbox main window.
3. Select Tools | System Info. If the connection is successful, the System Info
window displays the processor and device information.
34 • FlipTop Touchpanel Computer Center: QM-FTCC-TPS4 Operations & Installation Guide - DOC. 6393