Installation guide

Applications Guide Crestron MediaManager™
A QM-MD7x2 can also be connected to two more QM-MD7x2s, two QM-
MD8x8 switchers, two QM-MD4x2s switchers, or any combination of QM
switching devices. This provides additional inputs for one MD7x2 as shown in
the following diagrams.
QM-MD7x2 Connected with Other QM-Switching Devices
NOTE: When connecting multiple QM devices, the route between a QM
origination point (e.g., QM-WMC) and a QM endpoint (e.g., QM-RMCRX)
cannot have more than two midpoints (e.g., MD7x2 or other QM switchers).
Refer to page 4 for a network diagram.
• Crestron MediaManager™ Applications Guide – DOC. 6244
28