Installation guide

Crestron MediaManager™ Applications Guide
QM-MD8x8: MediaManager Matrix Switcher
The QM-MD8x8 has eight QuickMedia inputs and eight matrixed QuickMedia
outputs. Connecting an MP2 controller/switcher to the QM-MD8x8 via Cresnet
results in a complete control system capable of controlling everything in a room
including source selection, lights, shades, screens, displays, and audio.
Connect the outputs of the QM-MD8x8 to QM-RMCRX QuickMedia Receivers.
Each QM-RMCRX can convert the applied QuickMedia signal to RGB,
composite video, S-video, and line audio. QM-MD8x8 features include the
following.
Eight QuickMedia input ports •
•
•
•
•
•
Eight QuickMedia output ports
Cresnet control
Cresnet power distribution terminals
Matrix switch plus audio-breakaway
Switch on/off local-control panel
─ Operates as stand-alone without Cresnet communications
─ When operating in Cresnet mode, local controls can be active or
locked-out for security
─ Control processor can sense when the switcher is operating in
local-control mode
QM-MD8X8 Front and Rear View
Applications Guide – DOC. 6244 Crestron MediaManager™ •
23