Installation guide

Applications Guide Crestron MediaManager™
MP2/MP2E 2-Series Media Processor
The MP2 and MP2E universal media processors are the most flexible and
expandable room controllers in the world.
The MP2/MP2E contain two RS-232/422/485 ports, four IR/one-way serial
ports, four relays, four I/O ports, an IR receiver port and a Cresnet port.
The MP2 Series also have built-in A/V switches. Equipped with a 4x2
composite video matrix switcher (alternatively, it may be configured as a 2x1 S-
video switcher) and a 7x1 stereo audio switcher/controller, including volume,
bass and treble controls and a parametric equalization.
The MP2E provides connectivity for communication and control of Cresnet, IP
and third party devices on the network. It provides LAN and Web access
through its built-in 10/100 BaseT Ethernet port, which supports static IP
addressing and full-duplex TCP/IP and UDP/IP protocols.
With speed, power, and extended memory, the 2-Series control systems are ideal
for enhanced applications like media help desks, videoconferencing, distance
learning, and entertainment facilities.
For additional information, refer to the latest version of the MP2/MP2E Media
Processor Operations Guide (Doc. 6175) available from the Crestron website
(www.crestron.com
).
MP2E Rear View
MP2 Master Mode
In master mode, the MP2/MP2E is a standalone 2-Series control system that
controls serial, Cresnet and Ethernet devices (MP2E only), while providing
sophisticated A/V switching and processing capabilities.
MP2 Slave Mode
In Cresnet or Ethernet slave mode, the MP2/MP2E operates as part of a larger
2-Series control system, where the programming resides in a separate 2-Series
processor that acts as the system master.
• Crestron MediaManager™ Applications Guide – DOC. 6244
18