Specifications

QuickMedia™ Distribution Amplifier Crestron QM-DA-2
Hardware Connections for the QM-DA-2 (Bottom View)
QM OUT:
QuickMedia Output
Carries Audio and
Video Signals
NET:
To Control System and
Other Cresnet Devices
NOTE: Do not connect 24 Volt power to more than one of the NET
connectors on the QM-DA-2.
NOTE: Ensure the unit is properly grounded by connecting the chassis
ground lug to an earth ground (building steel).
NOTE: To prevent overheating, do not operate this product in an area
that exceeds the environmental temperature range listed in the table of
specifications.
NOTE: For optimum performance, Crestron strongly recommends using
CresCAT-QM cable, available from Crestron. Other high quality/low
skew CAT5e/CAT6 wiring may also be used with varying performance.
10 • QuickMedia™ Distribution Amplifier: QM-DA-2 Operations Guide – DOC. 6918A