System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 93
2-Series Console Commands (continued)
AUTONEGOT
Description: This command sets the state of the autonegotiation process on the Ethernet device(s). Autonegotiation
is the process of automatically determining the speed of the Ethernet network. Entering the command
without a parameter displays the current setting.
Help Menu(s): Ethernet
Syntax: AUTONEGOT [device_num (ON | 10HALF | 10FULL | 100HALF | 100FULL)]
Parameters: device_num - number of the Ethernet device to set (0 or 1)
ON - autonegotiation is on (default)
10HALF - autonegotiation is OFF, use 10mps, half duplex
10FULL - autonegotiation is OFF, use 10mps, full duplex
100HALF - autonegotiation is OFF, use 100mps, half duplex
100FULL - autonegotiation is OFF, use 100mps, full duplex
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.001
Processor Group: Ethernet Processors
BROADCAST
Description: This command enables/disables the broadcasting of error messages. The messages will be logged
whether or not they are broadcast. Entering the command without a parameter displays the current state.
Help Menu(s): System
Syntax: BROADcast [ON | OFF]
Parameters: ON - turns on broadcasting of error messages (default)
OFF - turns off broadcasting of error messages
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.001
Processor Group: All Processors
BYE
Description: This command cancels a connection over the Ethernet, whether to the Telnet or CTP ports. If password
protection is enabled, the password has to be re-entered before connection is re-established.
Help Menu(s): System
Syntax: BYE
Parameters: none
Possible Source: CTP, Telnet
Minimum CUZ: 1.001
Processor Group: Ethernet Processors
CALTOUCH
Description: This command puts the CNX-DVP4/C2N-DVP4DI into touch screen calibration mode.
Help Menu(s): Device
Syntax: CALTOUCH
Parameters: none
Possible Source: RS-232, CTP, Telnet, User Program
Minimum CUZ: 1.017
Processor Group: Display Processors
(continued on next page)