System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 87
PRO2> MODEMINITSTRING
Current Init String: AT[0D][0A]
PRO2> MODEMINITSTRING ?
MODEMINITSTRING "{init string}"
{init string}: String to send to modem. 64
characters Max.
No Arguments: Shows current init string
PRO2> SENDMODEMINITSTRING ?
SENDMODEMINITSTRING {ON|OFF}
ON: Sends the modem init string at startup.
OFF: Does not send the modem init string at
startup.
No Arguments: Show current setting.
PRO2>SENDMODEMINITSTRING OFF
New Setting: OFF
by pressing HW-R or cycling power, NOT typing “reboot” at the console in this
case.), COM B will act as a program addressable COM port.
To keep the COM B operating in the console mode permanently, use the
COMCONSOLEMODE ON command in Viewport. For further details, refer to
“2-Series Console Commands for Modem Configuration” below.
2-Series Console Commands for Modem
Configuration
The modem initialization command can be changed with the console command
MODEMINITSTRING. However, the initialization generally is not changed unless
a modem is being used.
MODEMINITSTRING Console Commands
By default, the modem initialization string (and subsequent three second delay) is
sent at bootup. To turn this off and prevent the three second delay, use the
SENDMODEMINITSTRING command. This feature can be used when a modem
is not being used and the developer wants to shorten the control system’s startup
time.
SENDMODEMINITSTRING Console Commands