System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 69
Updating the Operating System
Introduction
All 2-Series control systems have an operating system file with a .cuz extension.
CUZ update files are used to introduce new features and are occasionally required to
support new devices. CUZ files are enclosed in a zip file that is available for
download from the Crestron website.
To download an update, click the appropriate zip file, choose the Save to Disk
option, and then specify the directory where the update is stored.
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Procedure
To upload the new .cuz to the control system:
1. Open Crestron Toolbox and establish communications with the control
system as described on page 5.
2. Select Functions | Firmware….
3. The “Firmware” window displays the model and current firmware version.
Click Browse… to find a new firmware file to upload.
“Firmware” Window
4. When the following screen appears, browse to locate the firmware (.zip)
file.