System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 61
“SIMPL Program” Window
3. Click the
button to browse for a new compiled (.spz) program.
“Open” Window
4. Select a file and click Open. When the “SIMPL Program” window re-opens
click Send.
IP Tables
Control systems that run programs using Ethernet communication between the
control system and Ethernet-enabled network devices require an IP table to enable
the control system to identify and communicate with Ethernet equipment on an IP
network. Each controlled Ethernet device has an IP table, also known as a master list.
The master list specifies the IP ID of the controlled device and the IP address or
FQDN of the control system(s) that will send it commands.
The control system’s IP table lists the IP address/fully-qualified domain name and
the IP ID of every device in the network. The IP ID is a hexadecimal value that must
be unique and ranges from 03 to FE.