System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 57
“Set Password” Window
4. Type in a new password and click OK to set the user password.
The password can also be disabled by clicking Disable Password.
Using the User Password
If the user password is set, the login screen shown in the following diagram will be
displayed.
User Login Screen
Enter “user” in the User Name field, the appropriate password, and click OK to
access the user pages.
If a user password has not been set, the login screen will not be displayed and the
browser will display the default user page.
NOTE: CUZ versions 3.112 and later require the name “user” and the correct user
password to browse the user pages. CUZ versions prior to 3.112 provide a lower
level of security than that provided by version 3.112.
Setting the Admin Password
Use Crestron Toolbox to set the admin password for accessing the control system’s
setup pages for Ethernet configuration and Network Address Translator (NAT)
operation. The admin password is the same as the TCP/IP console password.