System information

Reference Guide Crestron 2-Series Control System
56 • 2-Series Control Systems Reference Guide – DOC. 6256A
To retrieve the current Web project, click the Retrieve button. This allows you to
save the project on the hard drive before transferring a new project to the Web
server.
NOTE: Crestron e-Control 2 projects can use the default “Main.HTML” name or a
user-selectable file name.
To set the user password, refer to “Setting the User Password” on page 56.
SIMPL Windows
For each IP ID in the VT Pro-e browser project, there must be one corresponding
Crestron e-Control PC Interface symbol defined in the SIMPL Windows program.
The PC Interface symbol is one of the Ethernet modules that can be dropped into the
C2ENET-1 or C2ENET-2 card slot.
As with all Ethernet devices, each PC Interface must have an entry in the control
system’s IP table. The IP ID must match the IP ID that was assigned in VT Pro-e,
while the IP address must be set to a loopback: 127.0.0.1, when hosting internal.
Web Page Basics
User pages are served by directing a web browser to the IP address or the URL of the
control system (i.e. http://www.myprocessor.com).
The setup pages are served by directing a web browser to the IP address or the URL
of the control systems administrator interface (i.e.
http://www.myprocessor.com/setup/admin.ssi)
Passwords should be set for the user and administration pages for system security.
Setting the User Password
1. Open Crestron Toolbox and establish communications with the control
system as described on page 5.
2. Select Fucntions | Web Pages to open the “Web Pages” window.
“Web Pages” Window
3. Click Set User Password… to open the “Set Password” window.