System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 55
“Web Pages” Window
From this window, the developer can choose to send an entire project, only files that
have changed, or a single HTML file. Files can be sent to either the control system’s
internal flash memory or a compact flash card (if installed). The developer can also
set and/or change the user password for web pages served by the control system.
To set the control system to act as a web server, select the Enable Web Server check
box and click Apply.
To transfer Web pages:
1. If the Web page project is a VTPro-e project, select the VTPro-e XPanel
Web Project check box and locate the project folder. The default page list
will be grayed out because the default page has already been specified in the
VTPro-e project.
If the Web page project is not a VTPro-e project, clear the check box and
locate the project folder. Then specify the default page. The default page is
the first page to be displayed upon connecting to the Web server.
2. Click the Include Subdirectories check box to transfer the default page
along with all other pages and subfolders that are in the project folder.
Click the Send Modified Files Only check box to transfer only new or
changed files in the project folder.
3. Select the Storage Location: Internal Flash or Compact Flash.
If you select Compact Flash, type the name of the subfolder that will store
the Web project. This subfolder will be under the \HTML directory.
4. Click Send to start the transfer. The Crestron Toolbox will first compact the
file system to free reclaimable space. Then a status bar will display the
progress of the transfer operation.
If the Web server contains files that are not present in the project being sent, those
files will be deleted from the Web server.
To erase the contents of the Web server, click the Erase Web Pages button.