System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 49
2-Series Control System Requirements
• CUZ: 3.055 or later
• Crestron Toolbox: 1.01.06 or later
• Viewport: 3.53 or later
• SIMPL Windows: 2.04.11 or later
Enable SSL with a self-signed certificate
1. Establish a serial connection to the 2-Series control system as described in
“Serial Connection” on page 5.
2. Select Functions | SSL Management… to open the “SSL Management”
Window.
“SSL Management” Window
3. Check Enable SSL.
4. Select Self-Signed and click OK. The control system will reboot.
This generates a self-signed certificate that can be temporarily used while a CA-
signed certificate is obtained. Alternatively, the self-signed certificate can still be
used so long as the client is interested only in data encryption and not server identity.
Generate a Certificate Signing Request (CSR)
NOTE: The following requires the use of Viewport version 3.53 or later.
1. Open Viewport and select File Transfer|Generate Certificate
Request|Generate Certificate.