System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 43
The network administrator should configure the Windows Server as follows:
Configuration 1: DHCP + Dynamic DNS (Windows 2000
only)
The network administrator should configure the DHCP scope to include the
following scope options:
• 003 - Router
• 006 - DNS Servers
• 015 - Domain Name
The DHCP scope should also have the following options enabled:
• Always dynamically update all nodes
• Enable updating of nodes that do not support dynamic DNS
The DNS Server should have the following option enabled:
• Enable WINS Resolution (Windows (NT 4.0)
• Enable WINS Forward Lookup (Windows 2000)
Configuration 2: DHCP + DNS + WINS (Windows NT 4.0 and
Windows 2000)
The network administrator should configure the DHCP scope to include the
following scope options:
• 003 - Router
• 006 - DNS Servers
• 015 - Domain Name
• 044 - WINS/NBNS Servers
• 046 - WINS/NBT Node Type (set value to “0x2”)
The DNS Server should have the following option enabled:
• Handle Dynamic Updates (Windows 2000 only)
Control System Configuration
1. Open Crestron Toolbox and establish communications with the control
system as described on page 5.
2. Select Functions | Ethernet Addressing… to open the “Ethernet
Addressing” window.