System information

Reference Guide Crestron 2-Series Control System
40 • 2-Series Control Systems Reference Guide – DOC. 6256A
illustration). The IP ID for the MP2E must be 03 or higher to be a slave device. The
IP ID must also match the IP ID set in the master control system’s IP table.
C2ENET Device
Setting the IP ID in Device Settings
Double-click the MP2E icon to open the “Device Settings” window. This window
displays the MP2E device information. If necessary, select the IP Net Address tab to
change the IP ID and other IP information, as shown in the following figure.
“Device Settings” Window for the MP2E
SIMPL Windows will create a default IP table based on the IP IDs assigned in
System View. If selected, the default IP table can be uploaded to the control system
after the SIMPL Windows program has been uploaded to the control system.
NOTE: SIMPL Windows automatically changes IP ID values of a device added to a
program if a duplicate device or a device with the same default IP ID already exists
in the program. Always ensure that the IP table listings on the slave device and