System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 27
“Program NVRAM” Window
3. Click the Browse button next to the Retrieve button and specify the name
and location of the file to be saved.
4. Click Retrieve. A status bar will display the progress of the file transfer.
Restoring NVRAM Files to the Control System
NVRAM files can be restored to the control system from a saved file. To restore
NVRAM data to the control system from a saved file:
1. Open Crestron Toolbox and establish communications with the control
system as described on page 5.
2. Select Functions | Program NVRAM… to open the “Program NVRAM”
window.
“Program NVRAM” Window
3. Click the Browse button next to the Send button and specify the name and
location of the file to be restored.
4. Click Send. A status bar will display the progress of the file transfer.
NVRAMREBOOT
When a control system unexpectedly reboots, the error that caused the reboot is not
stored to the error log since the log is erased when the control system reboots.
However, the information contained in the error log can be written to NVRAM by
using the NVRAMREBOOT command.
To use NVRAMREBOOT:
1. Use Crestron Toolbox to establish communications with the control system
as described on page 5.