System information

Reference Guide Crestron 2-Series Control System
172 • 2-Series Control Systems Reference Guide – DOC. 6256A
Symbol for Device ID 22 (Room 3)
Uploading
The remap program is generated during a SIMPL Windows compile and has a .rmp
extension. The file must be combined with the VT Pro-e project (.vtz extension) and
uploaded to the touchpanel. In SIMPL Windows select Project | Convert/Compile
to open the "Select Compiler Destination" window, as shown after this paragraph,
and initiate a compile.
“Select Compiler Destination” Window
The programmer has two options when combining the remap program with the VT
Pro-e project. First, if the .vtz file is available, either enter its name in the File name:
field or use the window to navigate to its location. Clicking on the Select button
places the .rmp into the selected .vtz file. The other option applies when the .vtz file
is not readily available (i.e., saved on another PC). If faced with this situation, the
remap file can be saved as a standalone file, which can be inserted into the .vtz at the
programmer's convenience. Simply check the box at the bottom of the "Select
Compiler Destination" window and click on the Select button. SIMPL Windows
completes the compilation and outputs the .rmp file to the folder shown in the Look
in: field. When it comes time to combine the two files select File | Insert Remap
File from an open TPS project in VT Pro-e. Upload the project (with embedded
.rmp) to the Isys touchpanel using VT Pro-e (select File | Upload Project) or
Crestron Toolbox’s “System Info” window (select Functions | Project).