System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 145
Error Level Messages, S (continued)
MESSAGE DEFINITION
SendCompactFlash
FileXmodem: Error
reading from file.
An error occurred reading from the compact flash.
SendCompactFlash
FileXmodem: unable
to allocate buffer for
Xmodem xfer.
Internal system error. Contact Crestron.
SendCresnetPacket
ViaCIP: Problem
Writing to Pipe.
Internal system error. Contact Crestron.
SendInitialConnect:
Error sending Update
Request Packet.
Internal system error. Contact Crestron.
SendPingMsg: Error
sending Ping Msg
Packet: nn
Internal system error. Contact Crestron.
Signal Mismatch in
Receive of
Intersystem
Communications
Symbol/Device#.
(004B:####:004B)
When an XSIG symbol transmits an analog/digital/serial signal, the
receiving XSIG must have the same signal type at the same signal
position on the output of the XSIG. For example, if the tenth input
on an XSIG’s input is an analog signal, the tenth output on the
receiving XSIG’s output list must also be an analog.
StartFileOperations:
Unable to become a
file user.
This could occur if there are already too many concurrent users of
the files. Check for reentrant events accessing files.
String argument
cannot be greater
than #### characters
in Serial Send
Symbol/Device#
(003F:####:003F)
No longer used, this used to be part of very early CUZ files. It
would happen if the Serial Send tried to output greater than the
specified number of characters. This now has been incorporated
into the messages about packets too big to send on the network.
String input #### of
Serial Multiplexor
(special)
Symbol/Device# is too
long (250 characters
maximum, ####
specified).
(0042:####:0042)
The Serial Multiplexor (special) has some overhead on the output
string that it builds, which is five bytes. Therefore, the longest input
string can be 250 bytes.
String Length ####
Exceeded in Serial
Gather
Symbol/Device#.
(0019:####:0019)
The Serial Gather (GATHER) symbol has a user-defined length of a
temporary internal buffer. The symbol has received more than this
many characters without receiving the terminator character, and the
internal buffer has overflowed. If the overflow occurs, the internal
buffer is cleared.
Symbol
Symbol/Device# text
field #### exceeds
indirect text packet
length.
(006B:####:006B)
When an indirect text packet is created (such as from a serial string
that is routed to a touchpanel's serial inputs), there is overhead
introduced into the final Cresnet packet as a result of indirect text
formatting information. This overhead is dependent upon the
indirect text field number (i.e. text field 1 has less overhead than
text field 15 or 150, for example) and the number of embedded
carriage returns in the input serial string.
Symbol Queue
Overflow for symbol
Symbol/Device#.
(005D:####:005D)
While this is not an error that a user can do anything about, there
are known issues with CUZ files before 3.008 that can cause this
error.
(continued on next page)