System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 141
Error Level Messages, M (continued)
MESSAGE DEFINITION
Module xxxx : xxxx at
line nnn: String
Output Array
StringOutputArrayNa
me overflow. Element
= nn. Bounds = 1 to
bb.
The Simpl+ module has accessed a string array with an invalid
index, nn. Valid indices are 1 to bb.
Module xxxx : xxxx at
line nnn: String
StringName overflow.
Index = nn. Bounds =
bb
The Simpl+ module has accessed a string array with an invalid
index, nn. Valid indices are 1 to bb.
Module xxxx : xxxx at
line nnn: String
StringName overflow.
NewLen = nn.
MaxLen = mm.
The Simpl+ module has attempted to write more data into a
STRING variable than it can hold. Only the data that fits will be
written to the destination string.
Module xxxx : xxxx at
line nnn: Structure
Array
StructureArrayName
overflow. Element =
nn. Bounds = bb.
The Simpl+ module has accessed a sturcture array with an invalid
index, nn. Valid indices are 0 to bb.
Mute level ####
specified in Analog
Ramp (Bounds
Limited)
Symbol/Device# must
fall between #### and
####.
(006F:####:006F)
The user-specified mute level parameter on the Analog Ramp
(Bounds Limited) symbol must fall between the upper and lower
bounds. If this error is issued, this version of the ramp will NOT
perform any processing in response to transitions on its inputs.
N
MESSAGE DEFINITION
No device protocol
specified for
symbol/device#.
(0005:####:0005)
Internal system error. Contact Crestron.
No matching ID byte
in parameter to
transmit string input
#### for Serial
Multiplexor (special)
Symbol/Device#.
(0041:####:0041)
For each input string, there must be a corresponding “ID” byte to
build the output string in the Serial Multiplexor (special). For
example, if there are five input strings, there must be five ID bytes.
If not, this error is issued.
No NVRAM allocated
by the compiler for
Simpl+ module NAME
in Symbol/Device#.
(005F:####:005F)
Internal system error. Contact Crestron.
No Parent for slave
device
Symbol/Device#.
(005C:####:005C)
Internal system error. Contact Crestron.
(continued on next page)