System information

Reference Guide Crestron 2-Series Control System
132 • 2-Series Control Systems Reference Guide – DOC. 6256A
Error Level Messages, C (continued)
MESSAGE DEFINITION
Console Port: RS232
break detected.
System detected a break on the Console port.
Console Port: RS232
framing error.
System detected framing error on the Console port.
Console Port: RS232
overrun error.
System detected an overrun condition on the Console port.
Console Port: RS232
parity error.
System detected parity error on the Console port.
ConsoleRxHISR:
Error sending XOFF.
Internal system error. Contact Crestron.
ConsoleUartRead:
Bad Status from
uart2_rxchar: xx.
Internal system error. Contact Crestron.
Could not allocate
memory buffer for
Keyboard Scan Code
Converter
symbol/device#.
(002B:####:002B).
Internal system error. Contact Crestron.
Could not allocate
memory for Duple
Encoder string buffer
in symbol/device#.
(0022:####:0022).
Internal system error. Contact Crestron.
Could not allocate
memory for Duple
Decoder
symbol/device#.
(0024:####:0024).
Internal system error. Contact Crestron.
Could not allocate
memory for
symbol/device#.
(000D:####:000D).
Internal system error. Contact Crestron.
Could not allocate
memory for Transmit
Analog string buffer in
symbol/device#.
(001E:####:001E).
Internal system error. Contact Crestron.
Could not allocate
memory pool for
Compact.
Internal system error. Contact Crestron.
Could not allocate
space on transient
heap for serial strings.
(0016:####:0016).
The transient heap is 100K, and is used during a logic solution to
store transient strings issued from symbols such as a Serial Send.
If amount of data exceeds 100K from all active strings during a
solution, this error is issued.
Could not clear the
CF_DISK_INSERTED
flag.
Internal system error. Contact Crestron.
Could not create
MainDone Event.
Internal system error. Contact Crestron.
Could not create
MainStarted Event.
Internal system error. Contact Crestron.
(continued on next page)