System information

ManualsBrandsCrestron ManualsAmplifierQM-AMP3x80 Series

131

132

133

134

135

136

137

138

139

140

Crestron 2-Series Control Systems Reference Guide

Reference Guide – DOC. 6256A 2-Series Control Systems • 129

Error Level Messages, A (continued)

MESSAGE DEFINITION

Analog Scaler with I/O

Limits

Symbol/Device#

requires Input/Output

Lower/Upper bounds

to be from 0 to 65535

or -32768 to 32767.

Current

InputLowerBound=##

##,

InputUpperBound=##

##,

OutputLowerBound=#

###,

OutputUpperBound=#

###.

(0070:####:0070)

Since analogs are defined as a 16b number, the range of the

scaler’s bounds may either be 0 to 65535 if it is treated as an

unsigned 16b number, or -32768 to 32767 if it is treated as a signed

analog number. If this error message is issued, this version of the

ramp will NOT perform any processing in response to transitions on

its inputs.

Analog Scaler with I/O

Limits

Symbol/Device#

requires

InputLowerBound to

be <=

InputUpperBound.

Current

InputLowerBound=##

##,

InputUpperBound=##

##. (0071:####:0071)

On the scaler, it is a requirement that the lower bound of the input is

less than or equal to the upper bound of the input for scaling to be

correctly performed.

MESSAGE DEFINITION

Bad time/date format. Bad time and/or date format. Value is ignored.

BusTimeoutLISR:

Cardslot nn - Bus

Timeout Occurred.

The system detected a timeout has occurred on the bus. The bus